Download the Goodear Acoustic Shield Specifications Sheet for complete details including acoustical performance.
Rigid plywood core reinforced with density fibreboard, encased in closed cell EVA foam and finished with matt black fabric. Square brace socket with toggle screw.
Mounts on the Goodear Tripod Stand or Goodear Plate Stand (available separately) for individual use.
594 x 286 x 252 mm / 23.4 x 11.3 x 9.9 in (W x H x D)
54 mm / 2.1 in
25 x 25 x 125 mm / 1.0 x 1.0 x 4.9 in (L x W x D)
Recommended pole dimensions for mounting:
Diameter: 21–24 mm / 0.8–0.9 in
2.0 kg / 4.4 lb
Steel tubes with black enamel finish. Rubber caps on feet to prevent slipping. Screw clamp for height adjustment with 6 preset holes, safety pin and lock. Collapsible for easy transport and compact storage.
720 x 100 x 80 mm / 28.3 x 3.9 x 3.1 in (H x W x D)
Maximum height: 1,360 mm / 53.5 in
Base (triangular area): 640 mm / 25.2 in per side
1.2 kg / 2.6 lb
Steel tubes with black enamel finish. Heavy duty cast iron base slides fully under risers with at least 30 mm / 1.2 inches clearance. Screw clamp for height adjustment with 8 preset holes, safety pin and lock.
Suitable for permanent or semi-permanent setups where limited transportation is required. For convenient transport and storage, the Goodear Tripod Stand (see above) is recommended.
Base:
Diameter: 300 mm / 11.8 in
Height: 15–30 mm / 0.6–1.2 in (outside edge to centre)
Weight: 4.2 kg / 9.3 lb
Pole:
855 x 50 x 50 mm / 33.7 x 2.0 x 2.0 in (H x W x D)
Height: 1,670 mm / 65.7 in
Weight: 5.0 kg / 11.0 lb
Ideal height setting should allow for the ears of the performer to be centred vertically in relation to the shield.
Maximum: 1,520 mm / 59.8 in
Minimum: 1,115 mm / 43.9 in
Ideal height setting should allow for the ears of the performer to be centred vertically in relation to the shield.
Maximum: 1,820 mm / 71.7 in
Minimum: 1,220 mm / 48.0 in
Disclaimer: The images shown on this website are for illustration purposes only and may not be an exact representation of the actual products due to minor variations in the manufacturing process.
Copyright © 2024, Symphony Services International
PO Box 142, Broadway, NSW 2007, Australia
Tel. +61 2 8014 7625
ABN 69 121 149 755